EPA Method 170.1


ALS - Columbia offers EPA Method 170.1 testing at these laboratories:

Jacksonville Jacksonville, Florida Laboratory
Rochester Rochester, New York Laboratory
Simi Valley Simi Valley, California Laboratory

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 170.1 (PDF File)


EPA Method 170.1:
Temperature by Thermometer. Official Name: Temperature (Thermometric)

Summary:
Temperature measurements may be made with any good grade of mercury-filled or dial type centigrade thermometer, or a thermistor.

Scope:
This method is applicable to drinking, surface, and saline waters; domestic and industrial wastes.

Citation:
Methods for the Chemical Analysis of Water and Wastes (MCAWW) (EPA/600/4-79/020)

Interferences:
None.

QC Requirements:
None.

Maximum Holding Time:
Analyze Immediately (MCAWW, Table 1).

Media:
WATER

Subcategory:
Inorganic

Concentration:
Not Available

Sample Prep:
None.

Precision:
See Standard Method 212, 14th Edition (1975).

Detection:
None.

Revision Number:
Issued 1974

Test Description:
Temperature -Thermom

Analytical testing dots
At least 1 analytes can be tested by ALS - Columbia using EPA Method 170.1. Please contact us for all available analytes which can be tested by EPA Method 170.1.

AnalyteCAS Number
Temperature, FieldCASID10166





Examples:  8260
TO-15

Examples:  Dioxin
Mercury
Analytical testing dots


<-- Search All Test Methods



Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.


Analytical testing dots