EPA Method 200.9

ALS - Columbia offers EPA Method 200.9 testing at these laboratories:

Kelso Kelso, Washington Laboratory

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 200.9 (PDF File)

EPA Method 200.9:
Trace Elements in Water by GFAA. Official Name: Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption

For total recoverable elements in a solid or a particulate-containing aqueous samples, the solid/particulate is solubilized by gentle refluxing with nitric and hydrochloric acids. After cooling, the sample is brought up to volume and particulate is separated from the sample using a centrifuge or overnight settling. For dissolved elements or total recoverable elements where sample turbidity (particulate concentration) is low, the sample is prepared for analysis by adding nitric acid and diluting to a predetermined volume. The concentrations of elements in the prepared sample are measured using stabilized temperature platform (STP) graphite furnace atomic absorption (GFAA) spectroscopy.

This method determines dissolved and total recoverable elements in ground water, surface water, drinking water, storm runoff, industrial and domestic wastewater. This method also determines total recoverable elements in sediment, sludges, and soil. Total-recoverable determination data for aqueous samples should be reported as total (dissolved + suspended fractions) metal data.

Methods for the Determination of Metals in Environmental Samples, Supplement 1 (EPA/600/R-94/111)

Interferences can be classified as spectral, matrix, elemental, and memory. Please see the method for details on reducing the levels of these interferences.(1) Spectral interferences: Caused by the resulting absorbance of light by a molecule or atom that is not the analyte of interest or emission from black body radiation coming from the carbon platform.(2) Matrix interferences: Caused by sample components that inhibit formation of free atomic analyte atoms during the atomization cycle- can be chemical or physical.(3) Elemental interferences: Antimony, aluminum, arsenic, cadmium, lead, selenium, silver, and thallium.(4) Memory Interferences: Caused from analyzing a sample containing a high concentration of an element which cannot be removed quantitatively in one complete set of furnace steps.

QC Requirements:
Method detection limit (MDL), initial precision and recovery (IPR), linear dynamic range (LDR), quality control sample (QCS), calibration verification solutions and blanks (CVs & CBs), method blanks (MBs), field blanks (FBs), equipment blanks (EBs), sampler check blanks, matrix spikes and matrix spike duplicates (MS/MSDs), and ongoing precision and recovery (OPR)

Maximum Holding Time:
6 months for aqueous samples. No holding time limitation for solid samples.



Ranges differ for each analyte depending on matrix, instrumentation, and selected operating conditions. Unless otherwise noted, the analytical range extends from the laboratory determined MDL to the upper limit of the linear dynamic range.

Precision and accuracy were determined using single laboratory recovery data from a drinking water sample matrix. NOTE: Electrodeless discharge lamps were used for analyses of antimony, arsenic, selenium, and tin.


Revision Number:
Revision 2.2, 1994

Test Description:
Trace Elements - GFA

Report Number:

Date Issued:

Analytical testing dots

Examples:  8260

Examples:  Dioxin
Analytical testing dots

<-- Search All Test Methods

Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.

Analytical testing dots