EPA Method 2C


EPA Method 2C does not directly match ALS - Columbia's list of currently available methods. Please call for availability.


Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 2C (PDF File)


EPA Method 2C:
DETERMINATION OF GAS VELOCITY AND VOLUMETRIC FLOW RATE IN SMALL STACKS OR DUCTS (STANDARD PITOT TUBE)

Summary:
The average gas velocity in a stack or duct is determined from the gas density and from measurement of velocity heads with a standard pitot tube.

Scope:
This method is applicable for the determination of average velocity and volumetric flow rate of gas streams in small stacks or ducts. Limits on the applicability of this method are identical to those set forth in Method 2, Section 1.0, except that this method is limited to stationary source stacks or ducts less than about O.30 meter (12 in.) in diameter, or 0.071 m2 (113 in.2) in crosssectional area, but equal to or greater than about O.10 meter (4 in.) in diameter, or 0.0081 m2 (12.57 in.2) in cross-sectional area.

Date Issued:
9/25/1996

Analytical testing dots


Examples:  8260
TO-15

Examples:  Dioxin
Mercury
Analytical testing dots


<-- Search All Test Methods



Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.


Analytical testing dots