EPA Method 335.2


ALS - Columbia offers EPA Method 335.2 testing at these laboratories:

Kelso Kelso, Washington Laboratory

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 335.2 (PDF File)


EPA Method 335.2:
Cyanide, total, in Water. Official Name: Cyanide, Total (Titrimetric; Spectrophotometric)

Summary:
The cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation operation and absorbed in a scrubber containing sodium hydroxide solution. The cyanide ion in the absorbing solution is then determined by volumetric titration using silver nitrate or colorimetrically using pyridine-barbituric acid procedure.

Scope:
This method is applicable to the determination of cyanide in drinking, surface and saline waters; and domestic and industrial wastes.

Citation:
Methods for the Chemical Analysis of Water and Wastes (MCAWW) (EPA/600/4-79/020)

Interferences:
(1) Oxidizing agents can destroy cyanides during storage.(2) Sulfide can complex with cyanide in sample or distillate.(3) Fatty acids cause interference during distillation.(4) Carbonate causes interference during distillation.(5) Aldehydes cause interference during distillation.(6) Glucose/Sugars cause interference during distillation.(7) Sulfur-containing compound causes interference during distillation by forming free sulfide that is captured in distillate.

QC Requirements:
not included

Maximum Holding Time:
14 days.

Media:
WATER

Subcategory:
Inorganic

Concentration:
0.02 - 1 mg/L

Precision:
Precision and accuracy values were calculated using interlaboratory data from EPA-managed Water Pollution (WP) performance evaluation studies.

Detection:
The colorimetric procedure is sensitive down to the specified minimum level.

Revision Number:
Issued 1974; Editorial Revision 1974 & 1978; Technical Revision 1980

Test Description:
Cyanide, Total -Titr

Report Number:
600/4-79-020

Analytical testing dots


Examples:  8260
TO-15

Examples:  Dioxin
Mercury
Analytical testing dots


<-- Search All Test Methods



Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.


Analytical testing dots