EPA Method 350.3


EPA Method 350.3 does not directly match ALS - Columbia's list of currently available methods. Please call for availability.


Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 350.3 (PDF File)


EPA Method 350.3:
Ammonia by Potentiometry. Official Name: Nitrogen, Ammonia (Potentiometric, Ion Selective Electrode)

Summary:
Ammonia is determined potentiometrically using an ion-selective ammonia electrode and a pH meter having an expanded millivolt scale or a specific ion meter.The ammonia electrode uses a hydrophobic gas permeable membrane to separate the sample solution from an ammonia chloride internal solution. Ammonia in the sample diffuses through the membrane and alters the pH of the internal solution, which is sensed by a pH electrode. The constant level of chloride in the internal solution is sensed by a chloride selective ion electrode which acts as a reference electrode.

Scope:
This method determines ammonia-nitrogen in drinking, surface, and saline waters; domestic and industrial wastes.

Citation:
Methods for the Chemical Analysis of Water and Wastes (MCAWW) (EPA/600/4-79/020)

Interferences:
(A) Volatile Amines: Volatile amines act as a positive interference (measured value is greater than the true value).(B) Mercury: Mercury forms a strong complex with ammonia. DO NOT preserve samples with mercuric chloride.

QC Requirements:
None given.

Maximum Holding Time:
28 days (MCAWW, Table 1).

Media:
WATER

Subcategory:
Inorganic

Concentration:
0.03 to 1400 mg/L ammonia as nitrogen.

Precision:
Precision and accuracy values were calculated using interlaboratory data from EPA-managed Water Pollution (WP) performance evaluation studies.

Detection:
-

Revision Number:
Issued 1974

Analytical testing dots


Examples:  8260
TO-15

Examples:  Dioxin
Mercury
Analytical testing dots


<-- Search All Test Methods



Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.


Analytical testing dots