EPA Method 3545A

EPA Method 3545A does not directly match ALS - Columbia's list of currently available methods. Please call for availability.

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 3545A (PDF File)

EPA Method 3545A:

Samples are prepared for extraction either by air drying and grinding, or by mixing the samples with anhydrous sodium sulfate or pelletized diatomaceous earth. The sample is then loaded into the extraction cell.

This method is a procedure for extracting water insoluble or slightly water soluble organic compounds from soils, clays, sediments, sludges, and waste solids. This method uses elevated temperature (100-180 EC) and pressure (1500-2000 psi) to achieve analyte recoveries equivalent to those from Soxhlet extraction, using less solvent and taking significantly less time than the Soxhlet procedure. This procedure was developed and validated on a commerciallyavailable, automated extraction system.

Report Number:
SW-846 Ch 4.2.1

Analytical testing dots

Examples:  8260

Examples:  Dioxin
Analytical testing dots

<-- Search All Test Methods

Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.

Analytical testing dots