EPA Method 3585

EPA Method 3585 does not directly match ALS - Columbia's list of currently available methods. Please call for availability.

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 3585 (PDF File)

EPA Method 3585:

Highly contaminated or highly complex samples may be diluted prior to analysis for volatiles using direct injection. One gram of sample is weighed into a capped tube or volumetric flask. The sample is diluted to 2.0 - 10.0 mL with n-hexadecane or other appropriate solvent. Diluted samples are injected into the GC or GC/MS for analysis.

This method describes a solvent dilution of a non-aqueous waste sample prior to direct injection analysis. It is designed for use in conjunction with GC or GC/MS analysis of wastes that may contain organic chemicals at a concentration greater than 1 mg/kg and that are soluble in the dilution solvent. Method 3585 has adequate sensitivity to determine the regulatory concentrations of the Toxicity Characteristic (TC) Rule.

Report Number:
SW-846 Ch 4.2.1

Analytical testing dots

Examples:  8260

Examples:  Dioxin
Analytical testing dots

<-- Search All Test Methods

Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.

Analytical testing dots