EPA Method 547


ALS - Columbia offers EPA Method 547 testing at these laboratories:

Kelso Kelso, Washington Laboratory

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 547 (PDF File)


EPA Method 547:
Determination of Glyphosate in Drinking Water by Direct-Aqueous-Injection b HPLC, Post-Column Derivatization, and Fluorescence Detection - July 1990.

Summary:
An aliquot of a filtered water sample is injected into a cation exchange high performance liquid chromatography (HPLC) column. Separation is achieved by using an isocratic elution. After elution from the analytical column, the analyte is oxidized with calcium hypochlorite. The product (glycine) is then coupled with o-phthalaldehyde-2-mercaptoethanol complex at 38oC to give a derivative fluorophor (post-column derivitization). The concentration of glyphosate eluted from the HPLC column is measured by detecting the fluorescence of the derivative with a fluorometer.

Scope:
This method determines glyphosate in drinking water.

Citation:
Methods for the Determination of Organic Compounds in Drinking Water - Supplement II (EPA/600/R-92-129)

Interferences:
(A) Glassware contamination: Thoroughly clean glassware, including baking or solvent rinse.(B) Reagent contamination: Use high purity reagents.

QC Requirements:
Initial demonstration of laboratory capability, followed by analysis of laboratory reagent blanks (LRBs), laboratory fortified matrix samples, laboratory fortified blanks (LFBs), and QC samples. Initial demonstration of laboratory capability includes analysis of LFBs at an analyte concentration of 250 ug/L. A MDL also must be determined.

Maximum Holding Time:
14 days generally; up to 18 months for glyphosate in frozen samples.

Media:
WATER

Subcategory:
Organic

Concentration:
Not specified in method. Range differs depending on matrix and instrumentation.

Precision:
Precision and accuracy values were determined using single laboratory data from eight replicate analyses of reagent water fortified with glyphosate.

Detection:
MDLs were determined using the standard deviation of replicate analyses of an analyte-fortified reagent water sample (25 ug/L of glyphosate) multiplied by the t-value for (# of samples - 1) degrees of freedom at the 99% confidence level. Detailed instructions for how MDLs are determined are found at 40 CFR part 136, Appendix B. NOTE: MDLs in ground water (GW) and dechlorinated tap water (TW) were also determined (GW = 9 ug/L, TW = 6 ug/L).

Revision Number:
Jul-90

Test Description:
Glyphosate by HPLC

Report Number:
600/4-90-020

Instrument used for this test:
HPLC

Analytical testing dots
At least 1 analytes can be tested by ALS - Columbia using EPA Method 547. Please contact us for all available analytes which can be tested by EPA Method 547.

AnalyteCAS Number
Glyphosate1071-83-6





Examples:  8260
TO-15

Examples:  Dioxin
Mercury
Analytical testing dots


<-- Search All Test Methods



Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.


Analytical testing dots