EPA Method 601


ALS - Columbia offers EPA Method 601 testing at these laboratories:

Rochester Rochester, New York Laboratory

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 601 (PDF File)


EPA Method 601:
Purgeable Halocarbons

Summary:
A sample is purged with an inert gas transforming the halocarbons to the vapor phase which is collected on an absorbent trap at ambient temperature. After the sample is purged, the trap is then heated, and backflushed with the inert gas onto an chromatographic column. The gas chromatograph is temperature programmed to separate the halocarbons which are then detected by a halide-specific detector. Method 624 can be used for GC/MS confirmation of compound match or interference.

Scope:
This method determines target compounds potentially found in municipal and industrial discharges.

Citation:
EPA Method Guidance CD-ROM (includes MCAWW Methods, and most current EPA Methods)

Interferences:
(A) Impurities in gas and plumbing: Impurities in the inert gas and organic plumbing system of the purge and trap concentrator tend to be the main cause of interference in the analytical system. The use of non-Teflon tubing and fittings should be avoided.(B) Contamination during collection: Samples can become contaminated by diffusion of volatile organic compounds across the septum seal during collection and storage. Use Field Blanks to verify possible contamination. Carryover: Contamination by carry-over in the analytical system can occur, especially in sample that are extremely concentrated. Frequent bakeout and cleaning of the purging system can help prevent carry-over

QC Requirements:
Initial demonstration of laboratory capability and the periodic analysis of laboratory reagent blanks, fortified blanks, and other laboratory solutions as a continuing check on performance.

Maximum Holding Time:
14 days

Media:
WATER

Subcategory:
Organic

Concentration:
MDL to 1000xMDL (ug/L).

Sample Prep:
None.

Precision:
The precision and accuracy values were determined using regression equations derived from a 20 laboratory validation study. The study determined analytes in reagent water, drinking water, surface water, and three industrial wastewaters spiked at six concentrations over the range 8.0 to 500 mg/L.

Detection:
MDL procedure is equivalent to the procedure at 40 CFR part 136, Appendix B. MDLs were determined using the standard deviation of 7 replicate analyses of a analyte-fortified reagent water sample multiplied by the t-value for 6 degrees of freedom at the 99% confidence level (3.14). Detailed instructions for how MDLs are determined are found in Section 12.1 of the Method.

Revision Number:
40 CFR Part 136, Appendix A (Current Edition)

Test Description:
Purgeable Halocarbon

Instrument used for this test:
GC

Analytical testing dots
At least 35 analytes can be tested by ALS - Columbia using EPA Method 601. Please contact us for all available analytes which can be tested by EPA Method 601.

AnalyteCAS Number
1,1,1-Trichloroethane (TCA)71-55-6
1,1,2,2-Tetrachloroethane79-34-5
1,1,2-Trichloroethane79-00-5
1,1,2-Trichlorotrifluoroethane76-13-1
1,1-Dichloroethane (1,1-DCA)75-34-3
1,1-Dichloroethene (1,1-DCE)75-35-4
1,2,3-Trichloropropane96-18-4
1,2-Dichlorobenzene95-50-1
1,2-Dichloroethane107-06-2
1,2-Dichloropropane78-87-5
1,3-Dichlorobenzene541-73-1
1,4-Dichlorobenzene106-46-7
2-Chloroethyl Vinyl Ether110-75-8
3-Fluorochlorobenzene625-98-9
Bromochloromethane74-97-5
Bromodichloromethane75-27-4
Bromoform75-25-2
Bromomethane74-83-9
Carbon Tetrachloride56-23-5
Chlorobenzene108-90-7
Chloroethane75-00-3
Chloroform67-66-3
Chloromethane74-87-3
Dibromochloromethane124-48-1
Dichlorodifluoromethane (CFC 12)75-71-8
Dichloromethane75-09-2
Methyl tert-Butyl Ether1634-04-4
Tetrachloroethene (PCE)127-18-4
Trichloroethene (TCE)79-01-6
Trichlorofluoromethane (CFC 11)75-69-4
Vinyl Chloride75-01-4
cis-1,2-Dichloroethene156-59-2
cis-1,3-Dichloropropene10061-01-5
trans-1,2-Dichloroethene156-60-5
trans-1,3-Dichloropropene10061-02-6





Examples:  8260
TO-15

Examples:  Dioxin
Mercury
Analytical testing dots


<-- Search All Test Methods



Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.


Analytical testing dots