EPA Method 7060A

ALS - Columbia offers EPA Method 7060A testing at these laboratories:

Kelso Kelso, Washington Laboratory
Rochester Rochester, New York Laboratory

Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 7060A (PDF File)

EPA Method 7060A:
Arsenic by GFAA. Official Name: Arsenic (Atomic Absorption, Furnace Technique)

Aqueous samples are digested with hydrogen peroxide and nitric acid in order to convert organic forms of arsenic to inorganic forms, to minimize organic interferences, and to solubilize the sample. Sludge samples are digested using the procedure in Method 3050. Nickel nitrate (or equivalent modifier) is then added to an aliquot of the digestate. Concentrations of arsenic in the matrix are then measured using a graphite furnace atomic absorption (GFAA) system.

This method determines the concentration of arsenic in wastes, mobility procedure abstracts, soils, and ground water.

SW-846 Online: Test Methods for Evaluating Solid Waste, Physical/Chemical Methods

(A) Loss of analyte: Elemental arsenic and its compounds are volatile, subsequently, some may be lost during sample preparation and/or analysis. Appropriate QC, including spiked samples and standard reference materials should be processed, as well as, adding a matrix modifier and choosing appropriate drying and charring cycles to detect and minimize volatilization losses.(B) Matrix interferences: Arsenic is susceptible to severe nonspecific absorption and light scattering during atomization. Aluminum is known be a positive interferent. In these instances, use an appropriate simultaneous background correction technique, such as Zeeman, in the case of aluminum.(C) Memory interferences: Arsenic can carry over if it is not completely volatilized, which can be detected by blank burns. The tube should be cleaned by regularly burning it at full power throughout the analysis.

QC Requirements:
Refer to section 8.0 of Method 7000.

Maximum Holding Time:
Not Available.



Aqueous: 5 - 100 ug/LNon-aqueous: varies with matrix type

Sample Prep:
Methods 7060A or 3050

See EPA Method 206.2


Revision Number:
Revision 1, September 1994

Test Description:
Arsenic (AA, Furnace Technique)

Instrument used for this test:

Analytical testing dots
At least 1 analytes can be tested by ALS - Columbia using EPA Method 7060A. Please contact us for all available analytes which can be tested by EPA Method 7060A.

AnalyteCAS Number

Examples:  8260

Examples:  Dioxin
Analytical testing dots

<-- Search All Test Methods

Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.

Analytical testing dots