EPA Method 8030A


EPA Method 8030A does not directly match ALS - Columbia's list of currently available methods. Please call for availability.


Method information displayed is provided for informational purposes only. No warranty (express or implied) is made as to the website accuracy, completeness, or applicability (such as the age of a method and whether or not it applies to your project). Please contact us for assistance. Analytical testing dots

PDF IconView Actual EPA Method 8030A (PDF File)


EPA Method 8030A:
Acrolein and Acrylonitrile by Gas Chromatography

Summary:
Method 8030 provides gas chromatographic conditions for the detection of the target analytes. Samples can be analyzed using direct injection or purge- and-trap (Method 5030). Tenax should be used as the trap packing material. Ground water samples must be analyzed using Method 5030. A temperature program is used in the gas chromatograph to separate the organic compounds. Detection is achieved by a flame ionization detector (FID).

Scope:
Method 8030 is used to determine the concentration of the following volatile organic compounds: Acrolein (Propenal) 107-02-8 and Acrylonitrile 107-13-1

Interferences:
Samples can be contaminated by diffusion of volatile organics (particularly chlorofluorocarbons and methylene chloride) through the sample container septum during shipment and storage. A trip blank prepared from organic-free reagent water and carried through sampling and subsequent storage and handling can serve as a check on such contamination.

Analytical testing dots


Examples:  8260
TO-15

Examples:  Dioxin
Mercury
Analytical testing dots


<-- Search All Test Methods



Suggestions? The test methods page continues to expand and improve. If you have suggestions for improvement, we would enjoy hearing from you. Please contact the webmaster here.


Analytical testing dots