Lab Science News - Science, chemistry and environmental news from laboratory experts

Posts Tagged ‘GC/MS SIM’

Polycyclic Aromatic Hydrocarbons (PAH) in Shellfish

Friday, May 28th, 2010

Polycyclic Aromatic Hydrocarbons (PAH) in Shellfish


Columbia Analytical Services, Inc. has extensive experience testing for low levels of Polycyclic Aromatic Hydrocarbons (PAH) in shellfish. Sensitive and selective techniques were developed over ten years ago and have been refined and improved on a continuing basis. In addition to the analysis for the common parent compounds, levels of the associated alkylated homologs can also be determined.

This analysis is typically performed using Gas Chromatography/Mass Spectrometry (GC/MS) operated in the Selective Ion Monitoring (SIM) mode. Key to the analytical procedure is proper sample preparation, which begins with shucking, compositing (as appropriate to the project plan), and homogenization via mechanical mixing. The preliminary preparation must be performed under clean laboratory conditions to prevent common PAH contamination. Decontamination of sample preparation equipment is performed and monitored closely to assure clean conditions. The sample homogenate is a homogenous slurry when prepared correctly. The homogenization techniques performed by Columbia Analytical have been inspected and approved by various organizations (e.g. US EPA, other federal government and state regulatory agencies, private industries, consultants, etc.) The data results for these projects were subjected to thorough government, public and private scrutiny.

(more…)

Analytical Testing for 1,4-Dioxane

Tuesday, January 26th, 2010

1,4 Dioxane Testing1,4-Dioxane (dioxane) is a chemical of concern for its potential health effects as a carcinogen and irritant. It is commonly found in personal care products such as detergents, shampoos, body lotions, and cosmetics, and is widely used as an industrial solvent and stabilizer in manufacturing processes (e.g., electronics, metal finishing, fabric cleaning, pharmaceuticals, herbicides, pesticides, antifreeze, paper, etc.). Currently, there are no established limits on the amount of dioxane in personal care products nor is it specifically regulated in manufacturing wastewater streams that may impact the surrounding environment. Manufacturers of personal care products should conduct laboratory analysis to determine the levels of dioxane in their products, and manufacturers using dioxane in their processes should analyze their waste streams for possible dioxane content.

(more…)